PERMANENT WAVING APPLICATION

We do not recommend applying OLAPLEX® Nº.2 BOND PERFECTOR® at the completion of this service due to the cream-based consistency and weight of the product.

1. Perform a thorough consultation.

2. Clarify the hair per manufacturer instructions.

3. OPTIONAL PERM PREP: Recommended for overly porous or chemically treated hair
Mix OLAPLEX® Nº.2 and protein treatment in equal amounts and apply to highly porous/ damaged areas. Place under the dryer with no cap until the hair is dry. Using a spray water bottle, re-moisten the hair.

4. Wrap perm as desired.

5. Use dosing dispenser to measure correct amount of OLAPLEX® Nº.1 BOND MULTIPLIER™; add to waving lotion. Apply to rods.

6. Test curl immediately to gauge how long to process.

7. Once the curl is fully developed, rinse with comfortably hot water to remove any residue.

8. Towel blot thoroughly.

9. Use dosing dispenser to measure correct amount of OLAPLEX® Nº.1 BOND MULTIPLIER™; add to neutralizer. Process as directed.

10.Optional step for porous or chemically treated hair. Refer to the chart below.

11.Remove rods. Rinse with cool water. Cleanse with OLAPLEX® Nº.4 BOND MAINTENANCE® SHAMPOO

12.Style as usual.

EXTREMELY POROUS HAIR:

1. Apply undiluted OLAPLEX® Nº.1 BOND MULTIPLIER™ directly on top of the neutralizer and time for 5 minutes.

2. Without rinsing, apply a second undiluted mixture of OLAPLEX® Nº.1 BOND MULTIPLIER™ on rods and time for an additional 5 minutes.

3. Proceed with step 11.

LIGHTENED HAIR:

1. Mix 1oz. OLAPLEX® Nº.1 BOND MULTIPLIER™ and 3 oz water and apply directly on top of the neutralizer and time for 5 minutes.

2. Without rinsing, apply a second mixture of 1 oz. OLAPLEX® Nº.1 BOND MULTIPLIER™ and 3 oz. of water.

3. Proceed with step 11.

COLORED HAIR:

1. Mix 1/2 oz. OLAPLEX® Nº.1 BOND MULTIPLIER™ and 3 oz. water.

2. Apply immediately on top of the neutralizer and time for 10 minutes.

3. Proceed with step 11.